Skip to content
Lumières
EN

How it works · ?

Common questions

What most often goes wrong, and what to do. Tap a question to read the answer.

The lights

No light responds
  1. Look at the interface status, at the top of the screen: it should be green, “DMX interface connected”. If not, plug it back in, and close any other lighting software.
  2. Does the button at the top right say “Lights on”? The room is dark: click it.
  3. Is the “Master” slider, at the top, at 0%?
  4. In Settings, My lights, “Identify” makes a light blink. If none responds, it’s often the cable between the interface and the first light.
  5. As a last resort: Settings, DMX interface, try another port speed, then restart Lumières.
Only one light doesn’t respond

It’s almost always its address or its mode. Check on the light that it has the same address as in Lumières, and the mode with the same number of channels as its profile. Then “Identify”: it should blink white.

Two lights do exactly the same thing

They have the same address, or their channels overlap. If that’s intended (two identical lights that should turn on together), add only one of them and say how many there are: its card shows “× 2”. Otherwise, Settings, My lights, flags it (“needs fixing”): give one of them another address, in Lumières and on the light.

Lights blink on their own

Put a DMX terminator (a 120 Ω resistor) on the “DMX OUT” socket of the last light in the chain.

My light isn’t in the list

First compare its manual with the included profiles: a “generic” profile suits any light that orders its channels the same way. Otherwise, create its profile.

The moving head goes dark for a moment when it changes color

That’s intentional. Its color comes from a wheel: while the wheel turns, Lumières turns it off for a quarter of a second. Otherwise, you would see every color in between go by.

My light’s laser doesn’t turn on

That’s intentional too: Lumières never turns on a laser, whatever the light. See safety.

A moving head doesn’t move

Look at its settings: is the motor speed, or the speed of the scene’s movement, set to “stopped”? Is it on in the current scene? A light that is off moves in the dark. And a motor doesn’t start while an act is playing: the act is in control of the lights.

The phone

The phone can’t find the PC
  1. Are the phone and the PC on the same Wi-Fi? Is Lumières open on the PC?
  2. The Windows firewall: on first launch, it asks you to allow Lumières. If the window was closed without accepting, you need to allow Lumières in the Windows firewall, for private networks (and public ones, if the room’s Wi-Fi is set as public).
  3. In the app, “Enter the address manually”: the address is on the PC, in Settings, Phone, “PC address on the network”.
The pairing code is refused

A pairing code is valid for five minutes, and only once. On the PC, request a new one (“Add a phone”) and enter it right away.

A scene started from the phone is refused

An act is playing: it controls the lights until it stops or is paused.

The beat doesn’t respond

With the PC: does the What this PC hears meter move? If not, turn up the music, check that the Windows sound isn’t muted, or switch to the other way of listening. With a microphone: move the PC closer to the speakers, and check that Windows lets apps use it (Settings, Privacy, Microphone). With the phone: is the microphone allowed? If not: Android Settings, Apps, Lumières, Permissions; put the phone near the music, not in a pocket. And the beat doesn’t start while an act is playing.

Is there an iPhone app?

No: the remote control is available for Android (10 or later).

The show and the music

Which music files?

MP3 or WAV files. Lumières copies them into its own folder: the original can stay where it is.

Will the lights drift out of sync with the music?

No. They follow the position of the music itself: a pause, a jump, a PC that slows down for a moment, they stay with it.

I placed a block in the wrong spot

Drag it to its place, or remove it with Delete. While composing, Ctrl + Z also undoes the last change.

In general

Do I need the Internet?

No. The PC talks to the lights through the interface, and to the phone over the room’s Wi-Fi: nothing goes via the Internet.

How many lights?

As many as fit in one DMX universe: 512 channels. Eight common lights often take fewer than a hundred; Settings, My lights, shows how many are used.

What about a Mac?

Lumières is software for Windows.

What happens when I close the software?

It asks for confirmation, then all the lights turn off. On the next launch, it starts with the room dark; a scene turns it back on. Running motors stop; their speed is kept.

I moved a scene to the trash by mistake

Settings, Scenes, trash: “Restore”. A removed light is restored the same way, in Settings, My lights, “Removed lights”.

I’ve messed everything up

Settings, Backups: restore the backup from a day when everything was fine. Today’s data is set aside first: nothing is lost.